It's The One Door Handle Replacement Trick Every Person Should Learn

Door Handle Replacement

Door handles seem like something minor, but if you dislike the appearance of the handles or are finding them difficult to use then it's time to replace them. With some patience, you can get a new handle in no time.

The majority of modern door handles come with cover plates that hide the screws for an attractive appearance. However, you'll need to attach them separately if your new handle doesn't have them attached already.

Removing the old Handle

Door handles are not only an important aesthetic addition to your home, but they're essential for security as they allow you to lock and unlock your door. Over time the door handle can start to lose its grip or feel loose. It might be beginning to appear worn out and old. This is an indication that it's time to replace it.

If your door handle is becoming difficult to use, it may be time to replace it. This is a problem since it means you can no longer lock or unlock your door, which could create a security risk for you and your family.

It is also a good idea to replace the handle on your door when it's damaged or broken.  window handles  broken door handle is dangerous, especially for elderly or children members who might struggle to open it. They may get trapped. Fortunately, it's fairly easy to fix a broken door handle by simply replacing the handle that was broken.

Most modern door handles are a standard size and therefore should fit any door. If you're not certain if the new door handle you are buying will work, remove the old one and measure the holes in its housing. This will enable you to buy the right size door handle.

The easiest way to take off your old door handle is to take it off of the door itself. Usually you'll need a screwdriver. However some door handles have the cover plate which hides the mounting screws, so you'll need to pry off this to reach the screws underneath. After you have removed the handle that was previously used, take note of how the spindle is attached. This will aid in aligning the new handle.

You can also remove the door handle by removing the latch mechanism. This is usually done using a screwdriver but you'll need to find the small latch, which should be on the edge of the trim piece. Once you've removed the latch, remove the handle from the strike plate, and then remove the latch off the door's edge.

Removal of the Strike Plate

You'll need to replace your latch plate when you replace the handle. It's the plate that holds the hole through which the door's latch hooks in when the door closes. The package the new handles come in will have two different latch plates: one that is rectangular and the other circular (see the above diagram that outlines door handle parts). If your current latch plate is rectangular, swap it over to the round one so that the latch hooks onto the strike plate in a way that makes the handle easier to use.

The first step is to remove the screw that's holding the latch plate in place. The screws are often quite tight and require a fair amount of force to loosen them. If you can, it might be beneficial to have a second person help with this process.

After the screws have been removed and the latch plate will slide out of the door easily. If it's stuck or won't move using a nail file to scrape the edges of the latch plate. This can sometimes free up the plate.

Now you can prepare the new strike plate to be installed. Utilizing the screws made of wood that came with the new handles, screw the latch plate onto the inside of the doorjamb. Do not overtighten your screws as this can cause damage to the strike plate.

If you're unsure if the latch plate is in the right position Try closing and then opening the door to check whether it locks and closes correctly. If not you'll have to adjust the strikeplate upwards or down, forward or back until the door locks correctly.

If the door is still moving or jiggles, then you may have to enlarge your latch hole on the strike plate. This is more common on older doors. It could be caused by wear and tear, hinges that are too shallow, the wrong size latch, or a damaged strike plate. If this is the situation then you should use a filing made of metal instead of a chisel, or hammer to adjust the strike plate.

Removing the Latch

The latch is an angled metal piece that slides in and out of a hole in the inside of your door. When you turn the handle, it pushes the latch forward and allows you to open the door. It also connects to a hole in the frame of the door to keep your door closed. If your door shakes when you close it, replacing the latch might be all you need to correct the issue.

It's difficult to see the screws that hold the latch to the door, but there's usually a small slot on the trim plate that lets you to insert a screwdriver in order to remove it. After you've removed the trim plate, it should be easy to remove the latch and the bolts that keep the latch and spindle in the position.

If the latch isn't easily removed then use a paperclip tool to take it off the handle mechanism. Place the item in the latch's slot that is recessed and gently turn or jiggle it until you feel the latch and handle begin to separate. You may have to do this several times before the latch is loose enough to allow it to be pulled out.

You should be able to slide the new latch into its slot without any problems after you have removed the old one. Use your new screws to attach the latch to the strike plate or door frame. Make sure it's properly positioned in the slot, and aligned with the screw chambers.

Before you install the new handle, make certain to measure your existing backset (the distance from the centre of the large hole on the front surface of the door to the edge). Also, make sure whether the size of the latch on the new handle is a good match to the measurement of your existing handle.

If you are replacing the latch or handle or handle, or if your previous lock cylinder is damaged, then you'll require a new one. If you're not changing locks the new lock will fit in your existing recess and also work with your existing keys. Pick a latch that has rectangular cover plates that match the handles you have.

Removing the Cover Plate

Door handles can begin to look shabby with time However, if you replace them with a modern lever-on-rose design, it's a quick and easy DIY and decorating project that will enhance the overall appearance of your home. You can buy complete sets that come with the appropriate escutcheons and privacy adjustor kits.

The first step in replacing the door handle inside is to remove the cover plate or rose, which hides the screws and inner mechanism. Find a release tab on the plate and use a flathead screwdriver to remove it from the knob. It could have a slot on one edge or be held by pins.

Remove the screw that is holding the handle inside and place it aside when the cover plate has been removed. Remove the screws that secure both the inner and outer plates. You can loosen them with a Philips Screwdriver. Then, remove the inner plates and latch plate from the door and set them aside.

Not all doors have this gap. If yours does not, you'll need to drill a hole in the door to install the new handle. It's the same procedure for opening a locked door however, you'll have to be extra cautious not to scratch the door or frame.

The installation of new door knob screws is necessary after holes have been drilled. Choose the same size as your old screws to avoid getting the handle too tight or loose. It's also necessary to install an additional strike rod and latch plate that aren't part of most door handle sets.

Amazon's Choice FAERSI 2-piece chrome finish handle sets are an excellent choice if you're in the market of a top-quality interior door handle replacement set. It's a factory-fit product and has received hundreds of 5-star reviews. It's a great choice to replace worn or damaged interior door hardware on your Chevy.